-
600 An operation is pending.
-
601 An
invalid port handle was detected.
-
602 The
specified port is already open.
-
603 The
caller's buffer is too small.
-
604
Incorrect information was specified.
-
605 The
port information cannot be set.
-
606 The
specified port is not connected.
-
607 An
invalid event is detected.
-
608 A
device was specified that does not exist.
-
609 The
device type was specified that does not exist.
-
610 An
invalid buffer was specified.
-
611 A
route was specified that is not available.
-
612 A
route was specified that is not allocated.
-
613 An
invalid compression was specified.
-
614 There
were insufficient buffers available.
-
615 The
specified port was not found.
-
616 An
asynchronous request is pending.
-
617 The
modem is already disconnecting.
-
618 The
specified port is not open.
-
619 The
specified port is not connected.
-
620 No endpoints could be
determined.
-
621 The system could not
open the phonebook.
-
622 The system could not
load the phonebook.
-
623 The system could not
find the phonebook entry for this connection.
-
624 The system could not
update the phonebook file.
-
625 The system found
invalid information in the phonebook.
-
626 A string could not be
loaded.
-
627 A key could not be
found.
-
628 The
connection was closed.
-
629 The
connection was closed by the remote computer.
-
630 The
modem was disconnected due to hardware failure.
*
-
631 The
user disconnected the modem.
-
632 An incorrect
structure size was detected.
-
633 The modem is already
in use or is not configured for dialing out.
-
634 Your computer could
not be registered on the remote network.
-
635 There
was an unknown error.
-
636 The device attached
to the port is not the one expected.
-
637 A string was detected
that could not be converted.
-
638 The request has timed
out.
-
639 No asynchronous net
is available.
-
640 A
error has occurred involving NetBIOS.
-
641 The
server cannot allocate NetBIOS resources needed to support the client.
-
642 One
of your computer's NetBIOS names is already registered on the remote
network.
-
643 A network adapter at
the server failed.
-
644 You will not receive
network message popups.
-
645 There
was an internal authentication error.
-
646 The account is not
permitted to log on at this time of day.
-
647 The account is
disabled.
-
648 The password for this
account has expired.
-
649 The account does not
have permission to dial in.
-
650 The
remote access server is not responding.
*
-
651
The modem has reported an error.
-
652 There
was an unrecognized response from the modem.
-
653 A macro required by
the modem was not found in the device .INF file section.
-
654 A command or response
in the device .INF file section refers to an undefined macro.
-
655 The [MESSAGE] macro
was not found in the device .INF file section.
-
656 The [DEFAULTOFF]
macro in the device .INF file section contains an undefined macro.
-
657 The
device .INF file could not be opened.
-
658 The
device name in the device .INF or media .INI file is too long.
-
659 The media .INI file
refers to an unknown device name.
-
660 The
device .INF file contains no responses for the command.
-
661 The
device .INF file is missing a command.
-
662 there was an attempt
to set a macro not listed in the device .INF file section.
-
663 The
media .INI file refers to an unknown device type.
-
664 The
system has run out of memory.
-
665 The modem is not
properly configured.
-
666 The
modem is not functioning.
-
667 The
system was unable to read the media .INI file.
-
668 The
connection was terminated.
-
669 The usage parameter
in the media .INI file is invalid.
-
670 The system was unable
to read the section name from the media .INI file.
-
671 The system was unable
to read the device type from the media .INI file.
-
672 The system was unable
to read the device name from the media .INI file.
-
673 The system was unable
to read the usage from the media .INI file.
-
674 The system was unable
to read the maximum connection BPS rate from the media .INI file.
-
675 The system was unable
to read the maximum carrier connection speed from the media .INI file.
-
676 The
phone line is busy. *
-
677 A
person answered instead of a modem.
-
678 There
was no answer. *
-
679 The
system could not detect the carrier.
-
680 There
was no dial tone. *
-
681 The
modem reported a general error.
-
691
Access was denied because the user name and/or password was invalid on
the domain. *
-
692 There
was a hardware failure in the modem.
-
695 The state machines
are not started.
-
696 The state machines
are already started.
-
697 The response looping
did not complete.
-
699 The
modem response caused a buffer overflow.
-
700 The
expanded command in the device .INF file is too long.
-
701 The
modem moved to a connection speed not supported by the COM driver.
-
703 The connection needs
information from you, but the application does not allow user
interaction.
-
704 The callback number
is invalid.
-
705 The authorization
state is invalid.
-
707 There was an error
related to the X.25 protocol.
-
708 The account has
expired.
-
709 There was an error
changing the password on the domain. The password might have been too
short or might have matched a previously used password.
-
710
Serial overrun errors were detected while communicating with the modem.
-
711 The Remote Access
Service Manager could not start. Additional information is provided in
the event log.
-
712 The
two-way port is initializing. Wait a few seconds and redial.
-
713 No
active ISDN lines are available.
-
714 No
ISDN channels are available to make the call.
-
715 Too
many errors occurred because of poor phone line quality.
-
716 The remote access
service IP configuration is unusable.
-
717 No IP
addresses are available in the static pool of remote access service IP
addresses.
-
718 The
connection timed out waiting for a valid response from the remote
computer.
-
719 The
connection was terminated by the remote computer.
-
720 The
connection attempt failed because your computer and the remote
computer could not agree on PPP control protocols.
-
721 The
remote computer is not responding.
-
722
Invalid data was received from the remote computer. This data was
ignored.
-
723 The
phone number, including prefix and suffix, is too long.
-
726 The
IPX protocol cannot be used for dial-out on more than one modem at a
time.
-
728 The system cannot
find an IP adapter.
-
729 SLIP
cannot be used unless the IP protocol is installed.
-
731 The
protocol is not configured.
-
732 Your
computer and the remote computer could not agree on PPP control
protocols.
-
733 Your computer and the
remote computer could not agree on PPP control protocols.
-
734 The PPP link control
protocol was terminated.
-
735 The
requested address was rejected by the server.
-
736 The
remote computer terminated the control protocol.
-
737
Loopback detected.
-
738 The server did not
assign an address.
-
739 The authentication
protocol required by the remote server cannot use the stored password.
Redial, entering the password explicitly.
-
740 An invalid dialing
rule was detected.
-
741 The
local computer does not support the required data encryption type.
-
742 The
remote computer does not support the required data encryption type.
-
743 The
remote server requires data encryption.
-
751 The callback number
contains an invalid character. Only the following characters are
allowed: 0 to 9, T, P, W, (,), -, @, and space.
-
752 A
syntax error was encountered while processing a script.
-
753 The connection could
not be disconnected because it was created by the multi-protocol
router.
-
754 The system could not
find the multi-link bundle.
-
755 The system cannot
perform automated dial because this entry has a custom dialer
specified.
-
756 This connection is
already being dialed.
-
757 Remote access
services could not be started automatically. Additional information is
provided in the event log.
-
758 Internet connection
sharing is already enabled on the connection.
-
760 An error occurred
while routing capabilities were being enabled.
-
761 An error occurred
while Internet connection sharing was being enabled for the
connection.
-
763 Internet connection
sharing cannot be enabled. There are two or more LAN connections in
addition to the connection to be shared.
-
764 No smart card reader
is installed.
-
765 Internet connection
sharing cannot be enabled. A LAN connection is already configured with
the IP address required for automatic IP addressing.
-
766 The system could not
find any certificate.
-
767 Internet connection
sharing cannot be enabled. The LAN connection selected on the private
network has more than one IP address configured. Reconfigure the LAN
connection with a single IP address before enabling Internet
connection sharing.
-
768 The connection
attempt failed because of failure to encrypt data.
-
769 The specified
destination is not reachable.
-
770 The remote machine
rejected the connection attempt.
-
771 The connection
attempt failed because the network is busy.
-
772 The remote computer's
network hardware is incompatible with the type of call requested.
-
773 The connection
attempt failed because the destination number has changed.
-
774 The connection
attempt failed because of a temporary failure. Try connecting again.
-
775 The call was blocked
by the remote computer.
-
776 The call could not be
connected because the destination has invoked the Do Not Disturb
feature.
-
777 The connection
attempt failed because the modem on the remote computer is out of
order.
-
778 It was not possible
to verify the identity of the server.
-
779 To dial out using
this connection, you must use a smart card.
-
780 An attempted function
is not valid for this connection.
-
781 The encryption
attempt failed because no valid certificate was found.
-
782 - Network
Address Translation (NAT) is currently installed as a routing
protocol, and must be removed before enabling Internet Connection
Sharing.
783 Internet Connection Sharing cannot be enabled. The LAN
connection selected as the private network is either not present, or
is disconnected from the network. Please ensure that the LAN adapter
is connected before enabling Internet Connection Sharing.
784 You cannot dial using this connection at logon time, because it
is configured to use a user name different than the one on the smart
card. If you want to use it at logon time, you must configure it to
use the user name on the smart card.
785 You cannot dial using this connection at logon time, because it
is not configured to use a smart card. If you want to use it at
logon time, you must edit the properties of this connection so that
it uses a smart card.
786 The L2TP connection attempt failed because there is no valid
machine certificate on your computer for security authentication.
787 The L2TP connection attempt failed because the security layer
could not authenticate the remote computer.
788 The L2TP connection attempt failed because the security layer
could not negotiate compatible parameters with the remote computer.
789 The L2TP connection attempt failed because the security layer
encountered a processing error during initial negotiations with the
remote computer.
790 The L2TP connection attempt failed because certificate
validation on the remote computer failed.
791 The L2TP connection attempt failed because security policy for
the connection was not found.
792 - The L2TP Connection Attempt failed because security
negotiation timed out.
793 - The L2TP connection attempt failed because an error occurred
while negotiating security.
794 - The Framed Protocol RADIUS attribute for this user is not PPP.
795 The Tunnel Type RADIUS attribute for this user is not correct.
796 - The Service Type RADIUS attribute for this user is neither
Framed nor Callback Framed.
797 - The modem could not be found.
798 - A certificate could not be found that can be used with
this Extensible Authentication Protocol.
799 - Internet Connection Sharing (ICS) cannot be enabled
due to an IP address conflict on the network. ICS requires the host
be configured to use 192.168.0.1. Please ensure that no other client
on the network is configured to use 192.168.0.1.
800 - Unable to establish the VPN connection. The VPN server
may be un-reachable, or security parameters may not be configured
properly for this connection.
801 This
connection is configured to validate the identity of the access
server, but Windows cannot verify the digital certificate sent by
the server.
900 The router is not running.
901 The interface is already connected.
902 The specified protocol identifier is not known to the router.
903 The Demand-dial Interface Manager is not running.
904 An interface with this name is already registered with the
router.
905 An interface with this name is not registered with the router.
906 The interface is not connected.
907 The specified protocol is stopping.
908 The interface is connected and hence cannot be deleted.
909 The interface credentials have not been set.
910 This interface is already in the process of connecting.
911 An update of routing information on this interface is already in
progress.
912 The interface configuration in invalid. There is already another
interface that is connected to the same interface on the remote
router.
913 A Remote Access Client attempted to connect over a port that was
reserved for Routers only.
914 A Demand Dial Router attempted to connect over a port that was
reserved for Remote Access Clients only.
915 The client interface with this name already exists and is
currently connected.
916 The interface is in a disabled state.
917 The authentication protocol was rejected by the remote peer.
918 There are no authentication protocols available for use.
919 The remote computer refused to be authenticated using the
configured authentication protocol. The line has been disconnected.
920 The remote account does not have Remote Access permission.
921 The remote account has expired.
922 The remote account is disabled.
923 The remote account is not permitted to logon at this time of
day.
924 Access was denied to the remote peer because username and/or
password is invalid on the domain.
925 There are no routing enabled ports available for use by this
demand dial interface.
926 The port has been disconnected due to inactivity.
927 The interface is not reachable at this time.
928 The Demand Dial service is in a paused state.
929 The interface has been disconnected by the administrator.
930 The authentication server did not respond to authentication
requests in a timely fashion.
931 The maximum number of ports allowed for use in the multilinked
connection has been reached.
932 The connection time limit for the user has been reached.
933 The maximum limit on the number of LAN interfaces supported has
been reached.
934 The maximum limit on the number of Demand Dial interfaces
supported has been reached.
935 The maximum limit on the number of Remote Access clients
supported has been reached.
936 The port has been disconnected due to the BAP policy.
937 Because another connection of your type is in use, the incoming
connection cannot accept your connection request.
938 No RADIUS servers were located on the network.
939 An invalid response was received from the RADIUS authentication
server. Make sure that the case sensitive secret password for the
RADIUS server is set correctly.
940 You do not have permission to connect at this time.
941 You do not have permission to connect using the current device
type.
942 You do not have permission to connect using the selected
authentication protocol.
943 BAP is required for this user.
944 The interface is not allowed to connect at this time.
945 The saved router configuration is incompatible with the current
router.
946 RemoteAccess has detected older format user accounts that will
not be migrated automatically. To migrate these manually, run XXXX.
948 The transport is already installed with the router.
949 Received invalid signature length in packet from RADIUS server.
950 Received invalid signature in packet from RADIUS server.
951 Did not receive signature along with EAPMessage from RADIUS
server.
952 Received packet with invalid length or Id from RADIUS server.
953 Received packet with attribute with invalid length from RADIUS
server.
954 Received invalid packet from RADIUS server.
955 Authenticator does not match in packet from RADIUS server.
Also see:
Microsoft's Windows98 Communications Error Messages.